Avaya Definity SI Maintenance Manual page 1492

Maintenance Object Repair Procedures
Error Log Entries and Test to Clear Values
Table 10-259. Duplication Interface Circuit Pack Error Log Entries
Error Aux
Type Data
1
0 0 Any
1 Sanity Circuit Test (#273)
108 (a) Any None
109 (a) Any None
257 SAT Loop Back Test (#274)
513 SPE A Loop Back Test (#275)
769 SPE B Loop Back Test (#276)
1025 Sanity Maze Test (#277)
1281 (b) Any DUPINT Status Query Test
(#315)
1537 (c) Any Background Test Query Test
(#271)
1793 (d) Any MBUS Time-Out Query Test
(#285)
1 Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
Notes:
a. This error indicates that an unexpected hardware reset has occurred on
the Duplication Interface circuit pack. Appropriate action has been taken by
the software to prevent malfunction. However, if this type error occurs with
regular frequency, the DUPINT circuit pack may need to be replaced.
b. There are several possible Aux Data fields for this error, including blank. All
indicate loss of contact with the indicated Duplication Interface circuit
packs.
10-706 Issue 4 May 2002
Associated Test
Alarm On/Off
Level Board Test to Clear Value
Any Any test dup 1C sh r 1
MAJOR/ ON test dup 1C l r 1
WRN
MAJOR/ ON test dup 1C sh r 3
WRN
MAJOR/ ON test dup 1C sh r 3
WRN
MAJOR/ ON test dup 1C sh r 3
WRN
MAJOR ON test dup 1C sh r 3
/WRN
MAJOR/ ON test dup 1C sh r 6
WRN
MAJOR/ ON test dup 1C sh r 3
WRN
MAJOR/ ON test dup 1C l r 3
WRN
555-233-123