Avaya Definity SI Maintenance Manual page 1710

Maintenance Object Repair Procedures
System Technician-Demanded Tests:
Descriptions and Error Codes
Investigate tests in the order they are presented in
codes associated with the Control Channel Loop Test, for example, you may also
clear errors generated from other tests in the testing sequence.
Table 10-335. System Technician-Demanded Tests
Order of Investigation
Control Channel Loop Test (#52)
SAKI Sanity Test (#53)
IP Address Query (#1371)
NIC Query Test (#1383)
Local Ping Test (#1379)
MP Diagnostic Test (#1406)
1 D = Destructive; ND = Nondestructive
Control Channel Looparound Test (#52)
This test queries the circuit pack for its circuit pack code and vintage and verifies
its records.
Table 10-336. TEST #52 Control Channel Looparound Test
Error
Code
None ABORT
2100
10-924 Issue 4 May 2002
Test Description/Recommendation
Result
System resources required for this test are not available.
1. Retry the command at 1-minute intervals a
maximum of 5 times.
Table 10-335. By clearing error
Short Test Long Test
Sequence Sequence
X X
X
X X
X X
X X
X
Continued on next page
Reset
Board
1
Sequence D/ND
ND
X D
D
ND
ND
X D
555-233-123