Dt-Ln-Bd (Data Line Circuit Pack) - Avaya Definity SI Maintenance Manual

DT-LN-BD (Data Line Circuit Pack)

DT-LN-BD (Data Line Circuit Pack)
MO Name (in
Alarm Log)
DT-LN-BD
DT-LN-BD
1 Where P is the port network number (1 for PPN and 2 or 3 for EPN); C is the carrier
designation (for example, A, B, C, D, or E); and SS is the address of the slot in the carrier
where the circuit pack is located (for example, 01, 02, etc.).
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also DAT-LINE (Data Line Circuit Port) Maintenance
documentation for related line information.
555-233-123
Alarm
Level Initial Command to Run
MIN test board PCSS sh
WRN test board PCSS sh
1
Full Name of MO
Data Line Circuit Pack
Data Line Circuit Pack
Issue 4 May 2002 10-695