Avaya Definity SI Maintenance Manual page 1635

FW-DWNLD (Firmware Download)
2. Fill in the fields listed in
Table 10-306. Firmware Download fields and descriptions
Field
Source Board
Location
Firmware Image
File Name
Target Board
Code
Suffix
Firmware
Vintage
Schedule
Download
Remove Image
File After
Successful
Download
555-233-123
Table
Description
Type the UCCSS address of the
source circuit pack.
Type the complete filename
(including file extension) of the
new firmware image file.
Type the circuit pack ID, for
example "TN2501."
Do not type the "AP" suffix.
Examples:
For VAL (TN2501AP) type AP.
For C-LAN (TN799DP), type DP.
For DS1 (TN464GP), type GP.
This is a display-only field for
TN799DP (C-LAN) and
TN2501AP (VAL).
Type y to schedule the firmware
download for another time.
Type n to start the firmware
download immediately after
completing the form.
Type y if you want the procedure
to automatically remove the new
firmware image file [default].
Type n if you do not want the
new firmware image file
removed.
10-306:
Notes
See Screen 10-5
section.
Self-download:
This must be the same circuit pack
type as the source circuit pack. You
cannot mix circuit pack types.
Remote-download:
This must be the same circuit pack as
the target circuit pack.
Once the firmware download begins,
you cannot make any changes to this
form.
If you answer n(o), then the
Date/Time and
Date/Time fields do not appear.
The download begins as soon as you
press .
Enter
At the completion of a successful
download, the procedure
automatically removes the new
firmware image file from the source
filesystem, freeing up the memory on
the source circuit pack. We
recommend using the default setting.
If you set this field to n, you must
manually remove the new firmware
image file from the source filesystem
after the download has completed.
See ''Disable filesystem''.
Continued on next page
Issue 4 May 2002
in the ''Verify files''
Start
Stop
10-849