Local Generic Control Points Spclgapc; Function Block; Functionality; Operation Principle - ABB RELION Series Technical Manual

1MRS758755 A
Parameter Values (Range)
Operation mode
Pulse length
Description
3.16.14
3.16.14.1
3.16.14.2
3.16.14.3
REC615 and RER615
Technical Manual
Unit
0=Pulsed
1=Persistent
-1=Off
10...3600000 ms

Local generic control points SPCLGAPC

Function block

GUID-2182EB7C-0709-4807-B6B2-508B2A5949C0 V1 EN
Figure 105: Function block

Functionality

The local generic control points function SPCLGAPC is dedicated only for local
controlling, that is, SPCLGAPC cannot be controlled remotely. The local control is
done through the buttons in the front panel.

Operation principle

The function can be enabled and disabled with the Operation setting. The
corresponding parameter values are "On" and "Off".
SPCLGAPC has the Operation mode, Pulse length and Description settings available
to control all 16 outputs. By default, the Operation mode setting is set to "Off". This
disables the controllable signal output. SPCLGAPC also has a general setting Loc
Rem restriction, which enables or disables the local or remote state functionality.
When the Operation mode is set to "Toggle", the corresponding output toggles
between "True" and "False" for every input pulse received. The state of the output is
stored in a nonvolatile memory and restored if the protection relay is restarted.
Step Default
-1=Off
10 1000
SPCRGAPC1
Output 16
Section 3
Basic functions
Description
Operation mode for generic control point
Pulse length for pulsed operation mode
Generic control point description
171