Settings - ABB RELION Series Technical Manual

Section 4
Protection functions
4.7.7
Table 486: MAPGAPC Group settings (Basic)
Parameter
Start value
Start value Add
Operate delay time
Table 487: MAPGAPC Non group settings (Basic)
Parameter
Operation
Operation mode
Table 488: MAPGAPC Non group settings (Advanced)
Parameter
Reset delay time
Absolute hysteresis
4.7.8
4.7.9
460

Settings

Values (Range) Unit
-10000.0...10000.0
-100.0...100.0
0...200000 ms
Values (Range) Unit
1=on
5=off
1=Over
2=Under
Values (Range) Unit
0...60000 ms
0.01...100.00
Monitored data
Table 489: MAPGAPC Monitored data
Name
START_DUR
MAPGAPC
Technical data
Table 490: MAPGAPC Technical data
Characteristic
Operation accuracy
Step Default
0.1 0.0
0.1 0.0
100 0
Step Default
1=on
1=Over
Step Default
100 0
0.01 0.10
Type Values (Range)
FLOAT32 0.00...100.00
Enum 1=on
2=blocked
3=test
4=test/blocked
5=off
Value
±1.0% of the set value or ±20 ms
1MRS758755 A
Description
Start value
Start value Add
Operate delay time
Description
Operation Off / On
Operation mode
Description
Reset delay time
Absolute hysteresis for operation
Unit Description
% Ratio of start time /
operate time
Status
REC615 and RER615
Technical Manual