Generic Control Point (16 Pcs) Spcgapc; Function Block; Functionality - ABB RELION Series Technical Manual

Section 3
Basic functions
3.16.12
3.16.12.1
3.16.12.2
162

Generic control point (16 pcs) SPCGAPC

Function block

GUID-3A7D9472-39BF-4522-83CA-89BFBA1800E6 V1 EN
Figure 102: Function block

Functionality

The generic control points function SPCGAPC contains 16 independent control
points. SPCGAPC offers the capability to activate its outputs through a local or remote
control. The local control request can be issued through the buttons in the single-line
diagram or via inputs and the remote control request through communication. The
rising edge of the input signal is interpreted as a control request, and the output
operation is triggered. When remote control requests are used the control points
behaves as persistent.
The Loc Rem restriction setting is used for enabling or disabling the restriction for
SPCGAPC to follow the R/L button state. If Loc Rem restriction is "True", as it is by
default, the local or remote control operations are accepted according to the R/L
button state.
Each of the 16 generic control point outputs has the Operation mode, Pulse length and
Description setting. If Operation mode is "Toggle", the output state is toggled for
every control request received. If Operation mode is "Pulsed", the output pulse of a
preset duration (the Pulse length setting) is generated for every control request
received. The Description setting can be used for storing information on the actual use
of the control point in application, for instance.
For example, if the Operation mode is "Toggle", the output O# is initially "False". The
rising edge in IN# sets O# to "True". The falling edge of IN# has no effect. Next rising
edge of IN# sets O# to "False".
1MRS758755 A
REC615 and RER615
Technical Manual