Signals; Settings; Monitored Data; Goose Function Blocks - ABB RELION Series Technical Manual

Section 3
Basic functions
3.13.4.4
3.13.4.5
Table 51: RESTVTR Non group settings (Basic)
Parameter
Primary voltage
Secondary voltage
Amplitude Corr
Angle correction
3.13.4.6
3.14
106
The WARNING output in the receiver is activated if the synchronization accuracy of
the sender or the receiver is worse than 4 μs. The output is held on for 10 seconds after
the synchronization accuracy returns within limits.
The WARNING output is always internally active whenever the ALARM output is
active.

Signals

Table 49: RESTVTR Input signals
Name
Uo
Table 50: RESTVTR Output signals
Name
ALARM
WARNING

Settings

Values (Range) Unit
0.100...440.000 kV
60...210 V
0.9000...1.1000
-20.0000...20.0000 deg

Monitored data

Monitored data is available in three locations.
• Monitoring/I/O status/Analog inputs
• Monitoring/IED status/SMV traffic
• Monitoring/IED status/SMV accuracy

GOOSE function blocks

GOOSE function blocks are used for connecting incoming GOOSE data to
application. They support BOOLEAN, Dbpos, Enum, FLOAT32, INT8 and INT32
data types.
Type Default
INT32-UL0 0
Type Description
BOOLEAN Alarm
BOOLEAN Warning
Step Default
0.001 11.547
1 100
0.0001 1.0000
0.0001 0.0000
1MRS758755 A
Description
IEC61850-9-2 residual
voltage
Description
Primary voltage
Secondary voltage
Amplitude correction
Angle correction factor
REC615 and RER615
Technical Manual