ABB RELION Series Technical Manual page 253

1MRS758755 A
Table 258: DPHHPDOC Group settings (Basic)
Parameter Values (Range)
Start value
Start value Mult
Directional mode
Time multiplier
Operating curve type
Operate delay time
Characteristic angle
Max forward angle
Max reverse angle
Min forward angle
Min reverse angle
Table 259: DPHHPDOC Group settings (Advanced)
Parameter Values (Range)
Type of reset curve
Voltage Mem time
Pol quantity
Table 260: DPHHPDOC Non group settings (Basic)
Parameter Values (Range)
Operation
Curve parameter A
Curve parameter B
Curve parameter C
Table continues on next page
REC615 and RER615
Technical Manual
Unit
0.10...40.00 xIn
0.8...10.0
1=Non-directional
2=Forward
3=Reverse
0.05...15.00
1=ANSI Ext. inv.
3=ANSI Norm. inv.
5=ANSI Def. Time
9=IEC Norm. inv.
10=IEC Very inv.
12=IEC Ext. inv.
15=IEC Def. Time
17=Programmable
40...200000 ms
-179...180 deg
0...90 deg
0...90 deg
0...90 deg
0...90 deg
Unit
1=Immediate
2=Def time reset
3=Inverse reset
0...3000 ms
1=Self pol
4=Neg. seq. volt.
5=Cross pol
7=Pos. seq. volt.
Unit
1=on
5=off
0.0086...120.0000
0.0000...0.7120
0.02...2.00
Step Default
0.01 0.10
0.1 1.0
2=Forward
0.01 1.00
15=IEC Def. Time
10 40
1 60
1 80
1 80
1 80
1 80
Step Default
1=Immediate
1 40
5=Cross pol
Step Default
1=on
1 28.2000
1 0.1217
1 2.00
Section 4
Protection functions
Description
Start value
Multiplier for scaling the start value
Directional mode
Time multiplier in IEC/ANSI IDMT curves
Selection of time delay curve type
Operate delay time
Characteristic angle
Maximum phase angle in forward
direction
Maximum phase angle in reverse
direction
Minimum phase angle in forward direction
Minimum phase angle in reverse direction
Description
Selection of reset curve type
Voltage memory time
Reference quantity used to determine
fault direction
Description
Operation Off / On
Parameter A for customer programmable
curve
Parameter B for customer programmable
curve
Parameter C for customer programmable
curve
247