10.2 Selecting a Set of Cutting Conditions
Four different sets of user-defined cutting conditions can be registered in the plotter's memory as COND
Nos. 1 through 4. To specify a set of cutting conditions, you must first select the destination COND No. By
selecting a different COND No., you can easily switch between pre-defined cutting conditions for four types
of media.
Procedure
(1) Press a function key (
corresponding number.
(2) The selected set of cutting conditions are loaded to the plotter and become the currently selected
cutting conditions.
FC4500-UM-251-9370
,
,
, or
F1
F2
F3
F4
10 SPECIFYING THE PEN CONDITIONS
) to select a pre-defined set of cutting conditions of the
151