Setting Enlarge/Shrink Scale - GRAPHTEC FC8000 Series User Manual

Setting Enlarge/Shrink Scale

can enlarge or shrink cutting.
It
The rate of enlargement or shrinkage of the cutting data can be changed by settings.
Supplement
Settings of the enlarge/shrink scale is maintained even if the power is turned off.
Operation
Press the [MENU] key.
1
MENU screen is displayed.
Press the [3] key (AREA).
2
AREA PARAMETERSsetting screen (1/2) is displayed.
Press the [2] key (SCALE).
3
SCALE setting screen is displayed.
Press the POSITION (¡ã¡å ) key and increase or decrease the
4
setting value.
Confrm the setting and press the [ENTER] key (SET).
5
Setting will be set, and it will return to AREA parameter screen (1/2).
Press the [MENU] key.
6
It will return to default screen.
Supplement
Values that can be set are 1/8, 1/4, 1/2, 1, 2, 3, 4,
POSITION
5, 6, 7, and 8 (multiplications).
Supplement
It will return to AREA parameter screen (1/2)
without changing the settings when you press the
POSITION (? ) key (CANCEL).
4-8