Stop CuttNg; Pause And Resume CuttNg - GRAPHTEC CE6000-120AP User Manual

3.5
Stop Cutting
It wll stop cuttng when the [PAUSE/MENU] key s pressed whle cuttng. Operaton selecton menu s dsplayed
on the screen of the control panel whle t s stopped. It s possble to choose ether to contnue or stop the
operaton.
It s also possble to exchange or reset the meda whle t s stopped.
Pause and Resume Cutting
Operation
1
Press the [PAUSE/MENU] key.
Cuttng wll stop and followng screen s dsplayed.
2
Perform necessary operaton, such as exchangng the meda.
3
Press the [1] key (CONTINUE JOB).
Cuttng wll start and the screen wll resume to operaton.
Supplement
There s no effect on the selecton of meda
type when the meda set lever s moved up
and down whle pausng the cuttng. It s also
possble to exchange or reset the meda.
Supplement
It wll stop cuttng by pressng [2] key (QUIT
JOB).
See "Stop Cuttng"
3-12
.
P.3-13