Setting The Acceleration - GRAPHTEC FC8000 Series User Manual

Setting the Acceleration

Set the acceleration of the tool that is used in each of the tool condition numbers. (Setting range: 1 to 8)
Operation
Press the [CONDITION] key in the default screen.
1
CONDITION setting screen (1/3) is displayed.
Press the POSITION (¡å ) key.
2
CONDITION setting screen (2/3) is displayed.
Press the [1] key (ACCEL.).
3
ACCEL setting screen is displayed.
* Display may vary depending on the selected tool condition number.
Press the POSITION (? ? ) key and select the tool condition
4
number (CONDITION No.).
Press the POSITION (¡ã¡å ) key and increase or decrease the
5
setting value.
Confrm the setting and press the [ENTER] key (SET).
6
Setting will be set, and it will return to CONDITION screen (2/3).
Press the [CONDITION] key.
7
It will return to the default screen.
POSITION
Supplement
It will return to CONDITION screen (2/3) without
changing the settings when you press the [4] key
(CANCEL).
Supplement
Guideline to set acceleration
POSITION
See "Setting the T ool Condition"
POSITION
2-30
P .2-24 .