When Registration Marks Are Scaned Wrongly - GRAPHTEC FC8600 Series User Manual

When registration marks are scaned wrongly.

Symptom
Registration marks cannot be scaned
properly. (scan error)
Cause
The registration mark lines
are thin.
Registration marks are
scratchy.
There are smears within the
scanning area.
The cutting media is floating. Press down the cutting media.
The color of the cutting
media is not black.
13-5
Solution
Set the registration mark lines to 0.3 to
1.0mm.
Write the registration mark lines more
clearly.
Remove the smears.
Adjust the cencor level. If this does not
help, use black registration marks.