NEC UNIVERGE SV9100 Features And Specifications page 1309

Program
Program Name/Description
Number
Multiline Telephone Basic Data Setup – MSG
15-02-26
Key Operation Mode
Determine whether an extension MSG key
should function as a Message key or Voice Mail
key . If set as a Message key, the user can
press the key to call the voice mail only when
they have new messages. If set as a Voice Mail
key, it functions as a normal Voice Mail key.
Multiline Telephone Basic Data Setup –
15-02-35
Message Waiting Lamp Cycle for Calling
Extension
Select the Message Waiting flash pattern for
the station that set the Message Waiting
reminder.
Multiline Telephone Basic Data Setup –
15-02-36
Message Waiting Lamp Cycle for Called
Extension
Select the Message Waiting flash pattern for
the station that receives the Message Waiting
reminder.
Multiline Telephone Basic Data Setup –
15-02-37
Voice Mail Message Wait Lamp Color
Select the color of the large LED when a voice
mail message is waiting at the extension.
Multiline Telephone Basic Data Setup –
15-02-38
Voice Mail Message Wait Lamp Cycle
Select the cycle method that the large LED
flashes when the extension has a VM Message
Waiting set to an extension.
Single Line Telephone Basic Data Setup –
15-03-01
SLT Signaling Type
For each UNIVERGE SV9100 voice mail
extension, set this option to 0.
Single Line Telephone Basic Data Setup –
15-03-03
Terminal Type
Enter 1 for this option to allow a single line port
to receive DTMF tones after the initial call
setup. Enter 0 to have the port ignore DTMF
tones after the initial call setup. For Voice Mail,
always enter 1 (e.g., receive DTMF tones).
Single Line Telephone Basic Data Setup –
15-03-09
Caller ID Function – For External Module
Set to 0 when voice mail is used or the
integration code for the disconnect function is
incorrect.
Single Line Telephone Basic Data Setup –
15-03-16
Special DTMF Protocol Send
Determine whether or not to send the extension
number of the phone forwarded to the
extension when Program 15-03-03 is set to 1
and not in the VM group.
Input Data
0 = Message Key
1 = Voice Mail Key
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
0 = Green
1 = Red
1 = Cycle 1
2 = Cycle 2
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7
0 = DP
1 = DTMF
0 = Normal
1 = Special
0 = Disable
1 = Enable
0 = No
1 = Yes
1309
Default
0
7
3
1
3
1
0
0
0