NEC UNIVERGE SV9100 Features And Specifications page 1287

SV9100 9.5" (Base and Expansion) Maximum System Capacities – Trunks/Ports/Channels
Number of:
*
Number of Timeslots 1
DT400/DT300 TDM (-48V)
SLT (-28V)
SLT (-48V)
DT800/DT700 IP
Desktop Applications
(Desktop Client, Desktop Client with
Shared Services and SoftPhones)
SIP/WLAN
Analog Trunks (COT)
BRI
PRI (1.5M)
IP Trunk (SIP/K-CCIS – IP)
DTMF Receivers
VoIP Channels
Voice Mail Channels on CPU
V34 Modem
1 = For -law countries 104 timeslots per chassis are assigned the G.711 PCM communications (e.g., voice
*
communications) and 7 timeslots per chassis are assigned for the Data communications (e.g., HDLC over
ISDN). Thus the simultaneous data communications are limited up to seven per chassis.
*
2 = An additional 64 DTMF Receivers are available when the GPZ-BS10 is installed.
An additional 64 DTMF Receivers are available when the GPZ-BS10 is installed.
If using Caller ID to analog trunks and DSP resources are set to common, DSP resources will only be used for analog
trunks and not analog stations.
Each Universal Slot is capable of 24 ports.
The Basic Port Package is limited to one chassis.
The PRTA blades can be programmed as a 4/8/12/16/20/24 port Fractional T1/PRI.
Program 10-39-01 must be Enabled).
If trying to assign an blade which would excede the maximum number of ports for the Basic
Port Package you do not get an error, but it does not let you program the related programs.
The 9.5" chassis can now accommodate two GCD-LTA (combo) blades in the universal
slots. Both blades can be viewed and accessed via PC Pro.
9.5" Base
x 1
x 1
(CPU + 2
(6 Slots)
Slots)
PCM 48 104
Data 7 7
32 80
32 80
8 20
16 40
16 40
48 96
80
1287
9.5" Base + Expansion
x 2 x 3
(12 Slots) (18 Slots) (24 Slots)
208 312
14 21
176 272
176 272
44 68
896
256
896
88 136
88 136
192 192
400
80 144
256
16 channels
1 channel
System
X4 Maximum
416 444
28 28
368
368
92
Total 896
Total 256
Total 896
184
184
192
Total 400
144 144
*
2
256
16
1