Warning Tone For Long Conversation; Warning Tone For Disa Callers - NEC UNIVERGE SV9100 Features And Specifications

Warning Tone for Long Conversation

Description
W
The system can broadcast warning tones to a trunk caller, warning the caller that he
has been on the call too long. If he chooses, the caller can disregard the tones and
continue talking. The outside caller does not hear the warning tones. Warning tones do not
occur for Intercom calls and most incoming trunk calls. DISA trunks can also have warning
tones. Warning tones are not available to analog single line telephone (SLT) users.
There are two warning tones: Alarm Tone 1 and Alarm Tone 2. Alarm
Tone 1 is the first set of tones that occur after the user initially places a
trunk call. Alarm Tone 2 broadcasts periodically after Alarm Tone 1 as a
continued reminder. Each alarm tone consists of three short beeps.
If programmed, DISA calls are disconnected unless the continue code is
entered by the user. With the Long Conversation Cutoff feature, incoming
or outgoing central office calls can also be disconnected.

Warning Tone for DISA Callers

For DISA callers, with this feature enabled, the warning tone timer begins
when an incoming DISA call places an outgoing call and either the inter-
digit timer expires or the outgoing call is answered.
If an outside call is transferred to forwarded off-premise using an outside
trunk, the warning tone timer begins immediately. This occurs only if either
trunk involved in the call is programmed for this feature (Program 14-01-
17). When transferring a trunk call off-premise, Program 14-01-13 must
be enabled (set to 1).
Conditions
Warning Tone for Long Conversation does not occur for incoming trunk calls.
Warning Tone for Long Conversation occurs for all outgoing
trunk calls, regardless of how they are placed or other
outgoing restrictions.
Warning Tone for Long Conversation can be enabled for DISA calls.
1369
W