NEC UNIVERGE SV9100 Features And Specifications page 1323

worker's mailbox - or use this procedure to call your mailbox from a co-worker's telephone.
- OR -
Press Speaker and dial 717.
2. If requested by Voice Mail, enter your security code.
 Ask your Voice Mail system administrator for your security code.

Normally, your Message Waiting LED goes out (if applicable). If it continues to flash, you have
unanswered Message Waiting requests or a new General Message. Refer to
Single Line Telephone
1. Lift the handset and dial 717.
 If you are at a co-worker's telephone, you can dial the Voice Mail master number and your mailbox
number instead. You can also use this procedure from your own telephone to call a co-worker's
mailbox.
2. If requested by Voice Mail, enter your security code.
Checking Messages:
1. Press the Message key once.
 The voice mail is called.
 When there are new messages, the Large LED on the telephone flashes red.
 With this option set, the MSG key can be used as a Voice Mail key for any function [calling voice mail
or transfer call a to voice mail (Hold + MSG + Extension Number), etc.].
Recording your Call
To record your active call in your mailbox:
Multiline Terminal
1. Press Voice Mail Record key (Program 15-07 or SC 851: code 78).
 You hear two beeps and your Record key flashes. The beeps periodically repeat to remind you that you
are recording.
 To stop recording, press the Voice Mail Record key again. You can restart and stop recording as
required.
- OR -
1. Press Hold.
2. Dial 754.
 The system automatically reconnects you to your call.
 To stop recording, place the call on hold then pick the call back up. You can restart and stop recording
as required.
Single Line Telephone
1. Hookflash.
2. Dial 754.
 The system automatically reconnects you to your call.
 To stop recording, hookflash twice. You can restart and stop recording as required.
1323
Checking Messages