NEC UNIVERGE SV9100 Features And Specifications page 1372

Program
Program Name/Description
Number
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
20-13-01 Class of Service Options (Supplementary
Service) – Long Conversation Alarm
Turn Off or On the Warning Tone for Long
Conversation (not for single line telephones).
System Options for Long Conversation –
20-21-01
Long Conversation Alarm 1
After a user places a trunk call, the system
sends the first warning tone to their extension
after this time.
System Options for Long Conversation –
20-21-02
Long Conversation Alarm 2
After hearing the first warning tone, the system
sends additional warning tones after this time.
The warning tones continue, spaced by this
time, until the user hangs up.
Trunk to Trunk Conversation – Conversation
20-28-01
Continue Code
Input the code that can be dialed to continue
the conversation after the Trunk-to-Trunk
Release Warning Tone is heard.
Trunk to Trunk Conversation – Conversation
20-28-02
Disconnect Code
Input the code that can be dialed to disconnect
the conversation after the Trunk-to-Trunk
Release Warning Tone is heard.
Trunk to Trunk Conversation – Conversation
20-28-03
Continue Time
When Program 14-01-25 is enabled, determine
the time a call is extended when the user dials
the Continue code defined in Program
20-28-01.
System Options for Outgoing Calls –
21-01-01
Seizure Trunk Line Mode
Select the trunk based on the Trunk Route
Priority (0) or based on the trunk that has not
been used in the longest time (1).
System Options for Outgoing Calls – Trunk
21-01-03
Interdigit Time (External)
The system waits for this time to expire before
placing the call in a talk state (Call Timer starts
after time expires. Voice Over and Barge-In are
not allowed until after time expires).
Input Data
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
0 ~ 64800 seconds
0 ~ 64800 seconds
0 ~ 9, #, *
0 ~ 9, #, *
0 ~ 64800 seconds
0 = Priority Route
1 = Circular Route
0 ~ 64800 seconds
1372
Default
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 0
170
180
No Setting
No Setting
0
0
5