NEC UNIVERGE SV9100 Features And Specifications page 1347

Program
Program Name/Description
Number
25-04-01 VRS/DISA Transfer Ring Group With No
Answer/Busy
Set the destination that Automated Attendant
(OPA) calls ring if the OPA caller dials an
extension that does not answer or is busy. This
also sets the options for DISA calls. The system
allows Ring Groups or Disconnect.
25-05-01 VRS/DISA Error Message Assignment
For each trunk answered by VRS, enter the
VRS message (1 ~ 100) the outside caller
hears if they dial incorrectly after answer. If you
enter 0, the call reroutes according to Program
25-03 and Program 25-04. Make one entry for
each Night Service mode.
VRS/DISA One-Digit Code Attendant Setup –
25-06-01
Next Attendant Message Number
Set up single digit dialing for Automated
Attendant callers. For each VRS Message
programmed to answer outside calls (see
Program 25-02-01), specify the digit the
Automated Attendant caller dials (1 ~ 9, 0, *,
#
). (Keep in mind that if you assign
destinations to digits 3 and 4, outside callers
cannot dial system extensions.)
VRS/DISA One-Digit Code Attendant Setup –
25-06-02
Destination Number
Set up single digit dialing for Automated
Attendant callers. For each VRS Message
programmed to answer outside calls (see
Program 25-02-01), specify the destination
reached (eight digits maximum) when the caller
dials the single digit code.
System Timers for VRS/DISA – VRS/DISA No
25-07-02
Answer Time
If an Automated Attendant caller dials an
extension that does not answer, the call waits
this time before rerouting to the Ring Group
specified in Program 25-03 and Program 25-04.
This time also affects unanswered DISA calls.
System Timers for VRS/DISA – Disconnect
25-07-03
after VRS/DISA retransfer to IRG
Set the time for disconnecting a call after it is
re-transferred to a ring group by VRS/DISA.
Input Data
Ring Groups:
1 ~ 100
Trunk Ports:
001 ~ 400
Day/Night Mode:
1 ~ 8
0 = (Disconnect)
1 ~ 100 = (Incoming Ring
Group)
102 = (In-Skin/External Voice
Mail or InMail)
103 = Centralized VM
104 = (Speed Dial table
Program 25-15-01).
0 ~ 100 (0 = No Setting)
0 ~ 100 (0 = No Setting)
101 = Voice Mail Answers
104 = Refer to 25-04: VRS/DISA
Transfer Ring Group with No
Answer/ Busy
105 = Dial the other extension
106 = Record VRS
Maximum of eight digits.
0 ~ 64800 seconds
0 ~ 64800 seconds
1347
Default
0
0
0
No Setting
0
60