Changing Vrs Messages Using User Admin Mode (Ua) - NEC UNIVERGE SV9100 Features And Specifications

Troubleshooting
The table below shows possible Error messages and Causes:
Error Messages and Causes
Error Message
Mailbox XXX does not exist.
(XXX = mailbox number)
The mailbox is being used by another
session
There is no available space in the SD.
The file is being used by another session.
Please try again later.
The selected file has already been deleted.
The file is being used by another session.
Please try again later.
The selected file has already been deleted.
Cannot upload the file since the original file
is being used by another session. Please try
again later.
Operation

Changing VRS Messages using User Admin Mode (UA)

Audio files up to 1MB may be uploaded to the SV9100 for VRS messages. All 100 VRS
messages can be uploaded or deleted. The messages can be used on all VRS features:
General Message, Automated Attendant greetings, messages and the 900 Preamble.
In order for uploaded messages to play they must be in the proper format. Audio files not
recorded in the proper format may not playback. The proper format is:
Bit Rate
Sampling Size
Channel
Sampling Rate
Audio Format
1. To login, open an Internet browser and enter the IP of the SV9100 LAN port in the
address line. At default, the IP address is 192.168.0.10.
2. At the login screen enter username = USER1 and password = 1111.
3. You will then see the main menu, click on the VRS Audio Up/Download icon.
The mailbox does not exist
When the mailbox is being used by another session, either PC or
telephone.
When there is no available space in the SD.
When the file to be downloaded is being used by another
session, either PC or telephone.
When the file selected for download has already been deleted.
When the file selected for deletion is being used by another
session.
When the file selected for deletion has already been deleted.
When the file to be replaced is being used when trying to upload
the replacement.
64kbps
8 bits
1 (Mono)
8 KHz
CCiTT u-law
1360
Cause