NEC UNIVERGE SV9100 Features And Specifications page 1348

Program
Program Name/Description
Number
DISA User ID Setup – Password
25-08-01
Set up password (six digits).
System Option for DISA – VRS Message
25-13-01
Access Password
Enter the password DISA callers must dial
before the system allows them to record, listen
to or erase VRS messages.
DISA Transfer Target Setup – DISA Transfer
25-15-01
Target Area at Wrong Dial
Used to assign a speed dial number when the
wrong number is received.
DISA Transfer Target Setup – DISA Transfer
25-15-02
Target Area at No Answer or Busy
Used to assign a speed dial number when a
dial tone times-out and the target extension
does not answer or is busy.
DID/DISA Talkie Base Setup – Single Digit
25-16-01
Timer
Assign a timer, per single digit table, required to
expire before the allocated single digit entry is
applied.
DID/DISA Talkie Base Setup – DTMF Detect
25-16-02
1 = On setting detects DTMF signal during
sending VRS message for DID/DISA call.
0 = Off setting does not detect DTMF signal
during sending VRS message for DID/DISA
call.
Internal Paging Group Assignment –
31-02-01
Internal Paging Group Number
Assign extensions to Internal Paging Groups
(i.e., Page Zones).
Internal Paging Group Assignment –
31-02-02
Internal All Call Paging Receiving
Allow/Prevent All Call Internal Paging for each
extension. If allowed, extension can place and
receive All Call Internal Paging
announcements. If prevented, extensions can
make only (not receive) All Call Internal Paging
announcements. If combined, Paging zones
should be restricted as well. Change the
internal page zone group in Program 31-07-01
to 0.
Input Data
Dial (Six digits fixed)
#
(0 ~ 9, *, )
Six digits fixed
#
(0 ~ 9, *, )
Speed Dial bin number 0 ~ 1999
Speed Dial bin number 0 ~ 1999
0 ~ 64800
(0 = No Setting)
0 = Off
1 = On
0 ~ 64
(0 = No Setting)
0 = Off
1 = On
1348
Default
No Setting
No Setting
1999
1999
0
1
0 for IP Station
1 for TDM
Station
0