Accessing Socketserver Commands In Telnet/Ssh Sessions (Portvision Dx); Telnet Session - Comtrol DeviceMaster DM-2000 Series Installation And Configuration Manual

Managing the DeviceMaster

Accessing SocketServer Commands in Telnet/SSH Sessions (PortVision DX)

You can open a Telnet or SSH session using PortVision DX. Use the appropriate procedure for your site:
•

Telnet Session

(below)
• SSH Session on Page 124
Telnet Session
Use the following procedure to access a telnet session with PortVision DX.
1. In PortVision DX, PortVision DX, right-click the DeviceMaster in the Device List pane for which you want
to open a telnet session, and click Telnet/SSH Session.
2. Leave the popup set to Telnet and Selected Port 23, and click Ok.
122 - Managing the DeviceMaster DeviceMaster Installation and Configuration Guide: 2000594 Rev. F