Dscp-Queue Mapping - Comtrol ES7506 User Manual

Industrial rack mount managed poe switch; 4 - poe ports 2 - 10/100base-tx ports

Hide thumbs Also See for ES7506:

Table of Contents

DSCP-Queue Mapping

Use this page to change DSCP values to Physical Queue mapping table. Since the switch fabric of the RocketLinx ES7506

only supports four queues. Lowest, Low, Middle and High users should therefore assign how to map DSCP values to the level

of the physical queue. You should therefore assign how to map DSCP value to the level of the queue. You can change the

mapping table to follow the upper layer 3 switch or routers' DSCP setting.

After configuration, press Apply to enable the settings.

Note: You must Save the settings (Page 104), if you want to maintain these settings if the RocketLinx ES7506 is powered off.

74 - RocketLinx ES7506 User Guide: 2000529 Rev. E

DSCP-Queue Mapping

Table of Contents

Rocketlinx es7506