Connecting The Fiber Port (Rocketlinx Es8108F) - Comtrol RocketLinx ES8108 User Manual

Hardware Installation

Connecting the Fiber Port (RocketLinx ES8108F)

Connect the fiber port on the RocketLinx ES8108F to another fiber Ethernet device using the following information.
A wrong connection will cause the fiber port not to work properly.
The fiber connector is a standard connector or square connector (SC).
Mode Cable Type
50/125um
Multi
62.5/125um
Single 8-10/125um 1310nm
Note: In the IEEE standard, it suggests the available transmission distance is 2KM for 62.5/125um fiber optical cable in
1310nm wave length. Actually, the attenuation of Multi-Mode 62.5/125um optical fiber cable is 1.5dBm/km and the
maximum link distance can up to 4 to 5km.
14 - RocketLinx ES8108/ES8108F User Guide: 2000514 Rev. B
This is a Class 1 Laser/LED product.
Do not stare into the Laser/LED beam.
Caution
Transmit
Wavelength Power
(min.)
1310nm -20dBm
-15dBm
Transmit Receive
Power Sensitivity
(max.) (max.)
-14dBm -31dBm
-8dBm -34dBm
Min. Launch
Receive
Power –Max.
Sensitivity
Receive
(min.)
Sensitivity
0dBm 11dBm
-8dBm 19dBm
Connecting the Fiber Port (RocketLinx ES8108F)
Distance
(km)
2km
Note
(below)
30km