Administering Snmp Trap Reporting - 3Com LANPLEX 6000 User Manual

Administering
SNMP Trap
Reporting
Top-Level Menu
system
ethernet display
fddi mode
display
community
tokenring
addModify
bridge
trap
remove
ip
flush
snmp
smtProxyTraps
analyzer
script
logout
For network management applications, you can use the Administration
Console to manually administer the trap reporting address information.
If the system is set for multiple agent SNMP mode, trap reporting is based
on destination address (IP address of the SNMP manager) and/or a
destination agent (number of an agent used for proxying traps to an SNMP
manager). In both the trap information display and configuration,
destination address and destination agent are used.
Displaying Trap Information
Displaying the trap reporting information shows you the various SNMP traps
and the current destinations configured, as well as whether the proxying of
remote SMT traps is enabled or disabled.
To show the trap reporting information configured:
1 From the top level of the Administration Console, enter:
snmp trap display
If the system is set for single agent SNMP mode, the trap settings
automatically appear for the single agent. If the system is set for the
multiple agent SNMP mode, you are prompted for the agents for which you
want to display trap information.
2 If multiple agent SNMP mode is enabled, enter the agent(s) for which you
want to view the information. You can select individual agents or
display trap information for all the agents in the system.
Setting Up SNMP on Your System 3-23
to
all