164
C
12: C
HAPTER
ONFIGURING
Setting SNMP Agent
Status
SNMP
SNMP services can be enabled or disabled for all management clients
(that is, versions 1 and 2c) using the SNMP Setup Page.
Monitor users have no access to this page.
To set the operational status for SNMP:
1 Click Administration > SNMP > Setup. The SNMP Setup Page opens:
Figure 84 SNMP Setup Page
The SNMP Setup Page contains the following fields:
SNMP Agent Status
■
The possible field values are:
Enabled — Enables SNMP on the device.
■
Disabled — Disables SNMP on the device.
■
2 Set the status field.
3 Click
. The SNMP agent status is defined, and the device is
updated.
— Specifies
if SNMP is enabled on the device.