Configuring An Snmp User - 3Com Baseline 2928 PWR Plus User Manual

Item
ACL
Return to SNMPv3 configuration task

Configuring an SNMP User

Select Device > SNMP from the navigation tree, then click the User tab to enter the page as shown in
Figure 1-13. Click Add to enter the Add SNMP User page, as shown in
Figure 1-13 SNMP user
Figure 1-14 Create an SNMP user
Table 1-7 describes the configuration items for creating an SNMP user.
Associate a basic ACL with the group to restrict the source IP address
of SNMP packets, that is, you can configure to allow or prohibit SNMP
packets with a specific source IP address, so as to restrict the
intercommunication between the NMS and the agent.
list.
1-10
Description
Figure 1-14.