Table of Contents
Advertisement
3.5.3.8.7 CALCulate2:TRANsform:AMETer:TITLE:MODE command/query
It sets/ reads the title display mode in arc scale meter.
Command syntax
:CALCulate2:TRANsform:AMETer:RANGe:TITLE:MODE <title_mode>
<title_mode>
<Character program data>
UNIT
BLANK
TEXT
Query syntax
:CALCulate2:TRANsform:AMETer:RANGe:TITLE:MODE?
Response message <title_mode>
<title_mode> is <character response data> format.
3.5.3.8.8 CALCulate2:TRANsform:AMETer:TITLE:TEXT command/query
It sets/ reads the arbitrary character string which is displayed when TEXT is selected in the title
display of arc scale meter.
Command syntax
CALCulate2:TRANsform:AMETer:RANGe:TITLE:TEXT <title_text>
<title_text>
<Character string program data>
・Character string enclosed by double quotation marks or single quotation marks (8
characters or less)
・Character possible to be used :
0 to 9, a to z, A to Z, !"#$%&'()*+,-./:;<=>?@[¥]^_`{|}~ ad SP (however, the
same character as the enclosed character should not be duplicated)
For other than characters possible to be used, the command error occurs.
For details of <Character string program data>, refer to Section 3.2.
Query syntax
:SETUP:NAME?
Setting
Unit display
No title
Arbitrary character string display
84
Advertisement
Table of Contents
