3.7.1.4 Setting item for each measurement function
Setting items are classified into items sharing setting values for all measurement functions and
items having the individual setting value for each function. Different setting items between this
instrument and the VOAC752x series are as follows:
Functions
Sampling rate
dB calculation setting
Scaling calculation setting
Statistic calculation setting
Comparator (Limit) calculation setting
If the remote control program prepared for the VOAC752x series is used, it may be necessary to
modify settings of these items after changing the function.
3.7.1.5 Deffernce of data store/recall function
There are differences for data store/recall function between this instrument and the VOAC752x
series.
- Setting of address and number of articles
Storage area specification using :SAVE:STAR command or :SAVE:NUMB command is not
necessary.
- Address initialization setting
Address initialization setting by :SAVE:AINI command when recording is started cannot be
done. If the data recorded before start is not required, use :SAVE:CLE command to clear the
log data.
- Time stamp initialization setting
Time stamp initialization setting by :SAVE:TINI command when recording is started cannot
be done. Use :TIME:INIT command to initialize the time stamp.
- Detection of specified count recording
Stop using :MESR? query (when specified number of articles is reached) cannot be detected.
Alternatively, judgment is done by acquiring the recorded data count using :SAVE:NUMB?
query and :SAVE:STAT command is used to stop recoring.
- Reading out by :RCLL:DATA? during data recording cannot be done. Use :SAVE:STAT
command to stop recording and read out it.
VOAC7602/7502
Individual
Common
209
VOAC752x series
Common
Individual