Calculate2:Transform:meter:range:mode Command/Query; Calculate2:Transform:meter:range[:Upper] Command/Query - Iwatsu VOAC760 Manual

3.5.3.9.2 CALCulate2:TRANsform:METEr:RANGe:MODE command/query

It sets/ reads the range mode in analog meter display.
Command syntax
:CALCulate2:TRANsform:METEr:RANGe:MODE <range_mode>
<range_mode>
<Character program data>
AUTO
FULLSCALE
MANUAL
LOG
Query syntax
:CALCulate2:TRANsform:METEr:RANGe:MODE?
Response message <range_mode>
<range_mode> is <Character response data> format.
3.5.3.9.3

CALCulate2:TRANsform:METEr:RANGe[:UPPer] command/query

This sets and reads out the range in the manual mode of analog meter display.
Command syntax
:CALCulate2:TRANsform:METEr:RANGe[:UPPer] {<range_data>|MIN|MAX|DEF}
<range_data>
<Numerical program data>
1.0E-12 to 500E+12
Numerical value beyond limit is set by rounding up maximum value/minimum value, and becomes
execution error.
The numerical number other than specified one is set by rounding up in upper side number of the
specified numerical number.
The range mode of the analog meter display is set to MANUAL automatically.
Query syntax
:CALCulate2:TRANsform:METEr:RANGe[:UPPer]? [{MIN|MAX}]
Response message <range_data>
<range_data> is <NR3 numeral response data> format.
When the range mode has been set to exception of MANUAL, it becomes execution error and
returns 9.91E  37.
Setting contents
Auto range
Full scale range
Manual setting
Logarithm scale setting
Resolution Default value
1,2,5 steps 1.0
86