Data:bulk:state Query; Data:directory Command/Query - Iwatsu VOAC760 Manual

3.5.15.12 DATA:BULK:STATe query

This acquires the logging status in the bulk mode.
Query syntax
:DATA:BULK:STATe?
Response message <status>,<count>,<remain>
<status>
Character string indiacting the logging in the bulk mode. <status> is <Character program data>
format.
<status>
<Character program data>
STOP
WAIT
POST
<count>
Data counts of log recorded. <count> is <NR1 numeric value response data> format. It is 0 when
log stops.
<remain>
Data count required to be acquired after stop event detection. <remain> is <NR1 numeric value
response data> format. It is 0 when the stop event is NONE. In addition, it is 0 when log stops.
3.5.15.13

DATA:DIRectory command/query

This sets and reads out the directory when LOG data is copied in USB memory.
Command syntax
:DATA:DIRectory <directory>
<directory>
<Character program data>
・Usable character
Alphanumeric character - !#$%&'()-@^_{}~"
・Maximum 8 characters
・Enclose by single quotation ( ' ) or
double quotation ( " )
Please refer to section 3.2 for the details of <Character program data>.
Query syntax
:DATA:DIRectory?
Response message <directory>
<directory> is <character response data> format.
Remark
DATA:DIRectory command/query is effective only for VOAC7602. It becomes a command error for
VOAC7502.
Statis
Lot stopped
Waiting for stop event
Log recording after stop event detection
194