Calculate[1]:Limit:lower[:Data] Command/Query; Calculate[1]:Limit:upper:state Command/Query - Iwatsu VOAC760 Manual

3.5.3.1.2

CALCulate[1]:LIMit:LOWer[:DATA] command/query

This performs setting/reading of lower limit value for limit function.
Command syntax
:CALCulate[1]:LIMit:LOWer[:DATA] {<limit_data>|MIN|MAX|DEF}
<limit_data>
<Numerical program data>
-999.9999E+12 to +999.9999E+12
-999.999E+12 to +999.999E+12
Numerical value beyond limit is set by rounding up maximum value/minimum value within range,
and becomes execution error.
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
:CALCulate[1]:LIMit:LOWer[:DATA]? [{MIN|MAX}]
Response message <limit_data>
<limit_data> is <NR3 numerical response data> format figures.
3.5.3.1.3

CALCulate[1]:LIMit:UPPer:STATe command/query

This performs setting/reading of ON/OFF of the upper limit judgment for limit function.
Command syntax
:CALCulate[1]:LIMit:UPPer:STATe <off_on>
<off_on>
<Character program data>
OFF
ON
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
:CALCulate[1]:LIMit:UPPer:STATe?
Response message <off_on>
<off_on> is <NR1 numerical response data > format.
0 and 1 denote OFF and ON respectively.
Resolution Default value
－999.9999E+12
0.000001E-12
－999.999E+12
0.00001E-12
<Numerical program data>
0
1 (Excluding 0)
59
Models
VOAC7602
VOAC7502