Output Subsystem; Output[:State] Command/Query - Iwatsu VOAC760 Manual

3.5.11 OUTPut subsystem

3.5.11.1

OUTPut[:STATe] command/query

This sets and reads out ON/OFF of the DIO interface output function.
This is effective only when DIO option (SC-361) is installed on this instrument.
Command syntax
:OUTPut[:STATe] <off_on>
<off_on>
<Character program data>
OFF
ON
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
:OUTPut[:STATe]?
Response message <off_on>
<off_on> is <NR1 numerical response data> format.
0 and 1 denote OFF and ON respectively.
<Numerical program data>
0
1 (Excluding 0)
178