Sense]:Temperature:transducer:type Command/Query; Sense]:Temperature:transducer:tc:type Command/Query - Iwatsu VOAC760 Manual

3.5.8.11.7

[SENSe]:TEMPerature:TRANsducer:TYPE command/query

This sets and reads out the selection of the sensor of TEMP measurement.
Command syntax
[:SENSe]:TEMPerature:TRANsducer:TYPE <sensor>
<sensor>
<Character program data>
TC
RTD
FRTD
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
[:SENSe]:TEMPerature:TRANsducer:TYPE?
Response message <sensor>
<sensor> is <character response data> format.
Remark
[:SENSe]:TEMPerature:TRANsducer:TYPE command/query is effective only for VOAC7602.
It becomes a command error for VOAC7502.
3.5.8.11.8

[SENSe]:TEMPerature:TRANsducer:TC:TYPE command/query

This sets and reads out the thermocouple calculation as sensor for TEMP measurement.
Command syntax
[:SENSe]:TEMPerature:TRANsducer:TC:TYPE <tc_type>
<tc_type>
<Character program data>
R
K
T
J
E
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
[:SENSe]:TEMPerature:TRANsducer:TC:TYPE?
Response message <tc_type>
<tc_type> is <character response data> format.
Remark
[:SENSe]:TEMPerature:TRANsducer:TC:TYPE command/query is effective only for VOAC7602.
It becomes a command error for VOAC7502.
<Numerical program data>
Thermocouple
Terminal resistance temperature detector 2W
Terminal resistance temperature detector 4W
166