Data:bulk:limit Command/Query - Iwatsu VOAC760 Manual

3.5.15.11 DATA:BULK:LIMit command/query

This is used when the stop event in the bulk mode is set to Limit calculation. It sets/acquires the limit
calcution result which is used as the condition to generate the stop event.
Command syntax
:DATA:BULK:LIMit <limit>
<limit>
<Character program data>
GO
NOGO
HIGH
LOW
If this command is executed in trigger waiting status or measurement, none is done; resulting in
execution error.
Query syntax
:DATA:BULK:LIMit?
Response message < limit >
< limit > is <Character response data> format.
Setting
Event occurs when the limit calculation result is Go.
Event occurs when the limit calculation result is No Go.
Event occurs when the limit calculation result is High.
Event occurs when the limit calculation result is Low.
193