3.5.8.10.6
[SENSe]:PERiod:ACV command/query
This sets and reads out ON/OFF of the measured result display of ACV measurement at the time of
FREQ measurement (Period mode).
Command syntax
[:SENSe]:PERiod:ACV <off_on>
<off_on>
<Character program data>
OFF
ON
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
[:SENSe]:PERiod:ACV?
Response message <off_on>
<off_on> is <NR1 numerical response data> format.
0 and 1 denote OFF and ON respectively.
<Numerical program data>
0
1 (Excluding 0)
160