Hcopy[:Sdump]:Data:color Command/Query - Iwatsu VOAC760 Manual

3.5.12.5

HCOPy[:SDUMp]:DATA:COLor command/query

This sets and reads out ON/OFF of the color mode of hard copy of screen.
Command syntax
:HCOPy[:SDUMp]:DATA:COLor <off_on>
<off_on>
<Character program data>
OFF
ON
Turning ON becomes color setting.
Setting to OFF becomes monochrome setting.
Query syntax
:HCOPy[:SDUMp]:DATA:COLor?
Response message <off_on>
<off_on> is <NR1 numerical response data> format.
0 and 1 denote OFF and ON respectively.
Color setting and monochrome setting become ON and OFF respectively.
<Numerical program data>
0
1 (Excluding 0)
181