Sense]:Temperature:zero:auto Command/Query - Iwatsu VOAC760 Manual

3.5.8.11.6

[SENSe]:TEMPerature:ZERO:AUTO command/query

This sets and reads out ON/OFF of the auto zero function of TEMP measurement.
If ONCE is set, auto zero operation is executed once and then OFF is set.
Command syntax
[:SENSe]:TEMPerature:ZERO:AUTO <off_on_once>
<off_on_once>
<Character program data>
OFF
ON
ONCE
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
[:SENSe]:TEMPerature:ZERO:AUTO?
Response message <off_on_once>
<off_on_once> is <character response data> format.
Remark
[:SENSe]:TEMPerature:ZERO:AUTO command/query is effective only for VOAC7602.
It becomes a command error for VOAC7502.
<Numerical program data>
0
1 (Excluding 0)
165