Calculate2:Transform:ameter:range:offset[:Div] Command/Query - Iwatsu VOAC760 Manual

3.5.3.8.3 CALCulate2:TRANsform:AMETer:RANGe:OFFSet[:DIV] command/query

It sets/ reads the offset value in the manual mode of arc scale meter display in DIV unit.
Command syntax
:CALCulate2:TRANsform:AMETer:RANGe:OFFSet[:DIV] {<offset_div>|MIN|MAX|DEF}
<offset_div>
<Numerical program data>
-100,000 ~ +100,000
The value out of the range is rounded to the maximum or minimum value and the execution error
occurs.
The range mode of arc scale meter display is automatically set to MANUAL.
Query syntax
:CALCulate2:TRANsform:AMETer:RANGe:OFFSet[:DIV]? [{MIN|MAX}]
Response message <offset_div>
<offset_div> is <NR1 numeric value response data> format.
If the range mode is set to the other than MANUAL, the execution error occurs and 9.91E+37 is
returned.
Resolution Default value
1 0
80