Iwatsu VOAC760 Manual page 21

Remote control manual
Table of Contents

Advertisement

if DHCP is used to validate auto assignment of IP addresses, set the actually allocated IP address in
the REMOTE setting under the SYSTEM menu.
When the connection is normal, the execution result of the "ping" command appears as follows.
C:¥>ping 10.102.102.102
Pinging 10.102.102.102 with 32 bytes of data:
Reply from 10.102.102.102: bytes=32 time<10ms TTL=128
Reply from 10.102.102.102: bytes=32 time=20ms TTL=128
Reply from 10.102.102.102: bytes=32 time=20ms TTL=128
Reply from 10.102.102.102: bytes=32 time=30ms TTL=128
Ping statistics for 10.102.102.102:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 2ms, Maximum = 4ms, Average = 3ms
C:¥>
Alternatively, when there is some kind of obstacle in the network, so that a timeout occurs without
receiving a response, the execution result of the "ping" command appears as follows.
C:¥ >ping 10.102.102.102
Pinging 10.102.102.102 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 10.102.102.102:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:¥ >
When a timeout has occurred, there may be a problem in this instrument or the computer, such as the
IP address setting or the network connection.
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Voac7502

Table of Contents