3.5.8.8
SENSe:CONTinuity subsystem
3.5.8.8.1
[SENSe]:CONTinuity:THReshold command/query
This sets and reads out the threshold of CONT.
Command syntax
[:SENSe]:CONTinuity:THReshold {<threshold>|MIN|MAX|DEF}
<threshold>
<Numerical program data>
1 to 1000
Numerical value beyond limit is set by rounding up maximum value/minimum value, and becomes
execution error.
Numerical numbers under resolution are rounded up to the nearest whole number
It does not become execution error.
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
[:SENSe]:CONTinuity:THReshold? [{MIN|MAX}]
Response message <threshold>
<threshold> is <NR3 numerical response data> format.
Resolution
Default value
0.1
10
150
.