3.7.1.2 Limited function
Excluding "3.7.1.1 Expanded functions, functions added in this instrument cannot be set/ controlled.
Settings of these functions are forcibly changed when transiting to the remote status.
List of functions whose setting is changed when transiting to remote status
Functions
Primary display
Secondary display
Sampling rate
FREQ measurement mode
FREQ measurement during ACV
measurement
ACV measurement during FREQ
measurement
Sample count
Trigger display
Log mode
3.7.1.3 Non-supported function
This instrument does not support functions below:
Functions
Dual-display related
2-stage comparator calculation
Non-supported measurement function related
Optional switch related
DAC output related
TEMP measurement using thermocouple*
The thermocouple itself is supported and it is necessary to set the cold contact temperature using
:TEMP:JUNC command. Since this command does not operate on the VOAC752x series, care should be
taken when using it in the mixed environment.
NUMERIC (numeric value) display
METER (analog meter) display
Sampling rate corresponding to SLOW/MID/FAST
(See Section 3.7.7 .)
FREQ
OFF
OFF
1
0.0msec
NORMAL
List of non-supported functions
Command/query having :MAIN or :SUB header
:COMP:SRC[?]
:Command/query having MAIN:COMP header
:COMP:LVL[?]
Command/query having :BCH, :DAV, :DAA, or :LOHM
header
Command/query having :OPT header
Command/query having :DAC header
:TEMP:JUNC[?]
208
Setting values
Commands / queries