Sense]:Frequency:acv Command/Query - Iwatsu VOAC760 Manual

3.5.8.9.6

[SENSe]:FREQuency:ACV command/query

This sets and reads out ON/OFF of the measured result display of ACV measurement at the time of
FREQ measurement.
Command syntax
[:SENSe]:FREQuency:ACV <off_on>
<off_on>
<Character program data>
OFF
ON
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
[:SENSe]:FREQuency:ACV?
Response message <off_on>
<off_on> is <NR1 numerical response data> format.
0 and 1 denote OFF and ON respectively.
<Numerical program data>
0
1 (Excluding 0)
155