3.5.4
TRIGger subsytem
The following figure shows the trigger system.
Transition to trigger Wait
MEASure?
READ?
INITiate
Trigger
TRIGger:SOURce IMM
TRIGger:SOURce EXT external
signal
TRIGger:SOURce BUS TRG etc.
TRIGger:SOURce BUS TRG,
etc.
Trigger delay
TRIGger:DELay
Interval
SAMPle:TIMer
The REMOTE indicator of the annunciator cuts the measurement halt condition and besides in the
above figure (The trigger waiting state and the measurement are operating) as follows and it changes.
Indicator display
It becomes a measurement stop state whenever remote mode changes to local mode.
Measuring stop
status
Trigger wait
status
Delay
Measuring
sample
SAMPle:COUNt
≠1
Interval
State shown by indicator
Measurement stop state *
State of waiting for trigger or measuring
91
TRIGger:COUNt
≠1