Configure:diode Command; Configure Query - Iwatsu VOAC760 Manual

3.5.6.11 CONFigure:DIODe command

This sets the measuring function to DIOD.
There is no parameter.
Command syntax
:CONFigure:DIODe
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
3.5.6.12

CONFigure query

This repeats the measuring function and setting during selection.
This reads out the setting corresponding to parameters of each measuring function.
Query syntax
:CONFigure?
Response message
Measuring function name <range>,<resolution>
105