Calculate2:Transform:ameter Subsystem; Calculate2:Transform:ameter:range:mode Command/Query; Calculate2:Transform:ameter:range[:Upper] Command/Query - Iwatsu VOAC760 Manual

3.5.3.8 CALCulate2:TRANsform:AMETer subsystem

3.5.3.8.1 CALCulate2:TRANsform:AMETer:RANGe:MODE command/query

It sets/ reads the range mode in arc scale meter display.
Command syntax
:CALCulate2:TRANsform:AMETer:RANGe:MODE <range_mode>
<range_mode>
<Character program data>
AUTO
FULLSCALE
MANUAL
LOG
Query syntax
:CALCulate2:TRANsform:AMETer:RANGe:MODE?
Response message <range_mode>
<range_mode> is <character response data> format.

3.5.3.8.2 CALCulate2:TRANsform:AMETer:RANGe[:UPPer] command/query

It sets/ reads the range in manual mode of arc scale meter display.
Command syntax
:CALCulate2:TRANsform:AMETer:RANGe[:UPPer] {<range_data>|MIN|MAX|DEF}
<range_data>
<Numerical program data>
1.0E-12 ~ 500E+12
The value out of the range is rounded to the maximum or minimum value and the execution error
occurs.
The value other than a specified value is rounded up and the execution error does not occur.
The range mode of arc scale meter display is automatically set to AUTO.
Query syntax
:CALCulate2:TRANsform:AMETer:RANGe[:UPPer]? [{MIN|MAX}]
Response message <range_data>
<range_data> is <NR3 numeric value response data> format.
If the range mode is set to the other than MANUAL, the execution error occurs and 9.91E+37 is
returned.
Setting contents
Auto range
Full scale range
Manual setting
Logarithm scale setting
Resolution Default value
1-2-5 step 1.0
79