Sense]:Voltage[:Dc]:Srate Command/Query - Iwatsu VOAC760 Manual

3.5.8.2.2

[SENSe]:VOLTage[:DC]:SRATE command/query

This sets and reads out the sampling rate of DCV measurement.
Command syntax
[:SENSe]:VOLTage[:DC]:SRATE {<sample_rate>|MIN|MAX|DEF}
<sample_rate>
Power supply frequency
50Hz
2.5 (DEF)
10
50
100
500
1E  3
2E  3
7.5E  3
15E+3
30E+3
The setting range differs by the power supply frequency and AutoZero setting of DCV.
For the correspondence to sampling rate, please refer to the correspondence table in the
beginning of SENSe subsystem.
Numerical value beyond limit is set by rounding up maximum value/minimum value, and becomes
execution error.
Numerical number other than the specified value is rounded up in smaller number. It does not
become execution error.
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
[:SENSe]:VOLTage[:DC]:SRATE? [{MIN|MAX}]
Response message <sample_rate>
<sample_rate> is <NR3 numerical response data> format.
<Numerical program data>
Power supply frequency
60Hz
2.5 (DEF)
10
60
100
500
1E  3
2E  3
7.5E  3
15E+3
30E+3
110
AutoZero
1 (DEF)
4
20
100
500
1E  3
2E  3
7.5E  3
15E+3
30E+3