Setup:store:directory Command/Query; Setup:store Command - Iwatsu VOAC760 Manual

3.5.14.4

SETUP:STORe:DIRectory command/query

This sets and reads out the directory name when saving the setup into file in USB memory.
Command syntax
:SETUP:STORe:DIRectory <directory>
<directory>
<Character program data>
・Usable character
Alphanumeric character - !#$%&'()-@^_{}~"
・Maximum 8 characters
・Enclose by single quotation ( ' ) or
double quotation ( " )
Please refer to section 3.2 for the details of <Character program data>.
Query syntax
:SETUP:STORe:DIRectory?
Response message <directory>
<directory> is <character response data> format.
Remark
SETUP:STORe:DIRectory command/query is effective only for VOAC7602. It becomes a
command error for VOAC7502.
3.5.14.5

SETUP:STORe command

This saves current setup into the file in USB memory.
Command syntax
:SETUP:STORe <filename>
<filename>
<Character program data>
・Usable character
Alphanumeric character - !#$%&'()-@^_{}~"
・
Eight character fixation
・Only the numeric character: the end four
characters.
・Enclose by single quotation ( ' ) or
double quotation ( " )
Please refer to section 3.2 for the details of <Character program data>.
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Remark
SETUP:STORe command/query is effective only for VOAC7602. It becomes a command error for
VOAC7502.
Setting
Specifies file name to be
stored to USB memory.
Directory should be specified
by SETUP:STORe:DIRector
command.
186