Calculate1:Average Subsystem; Calculate[1]:Average:state Command/Query; Calculate[1]:Average:clear Command; Calculate[1]:Average:count Query - Iwatsu VOAC760 Manual

3.5.3.5

CALCulate1:AVERage subsystem

This paragraph explains of the command/query related to the statistic calculation (STATISTIC).
3.5.3.5.1

CALCulate[1]:AVERage:STATe command/query

This performs setting/reading of ON/OFF for the statistic calculation (STATISTIC).
Command syntax
:CALCulate[1]:AVERage:STATe <off_on>
<off_on>
<Character program data>
OFF
ON
If this command is executed during trigger waiting status or measurement, none is done and the
execution error occurs.
Query syntax
:CALCulate[1]:AVERage:STATe?
Response message <off_on>
<off_on> is <NR1 numeral response data> format.
0 and 1 denote OFF and ON respectively.
3.5.3.5.2

CALCulate[1]:AVERage:CLEar command

This initializes the sampling results of statistic calculation (STATISTIC).
Command syntax
:CALCulate[1]:AVERage:CLEar
3.5.3.5.3

CALCulate[1]:AVERage:COUNt query

This reads out number of calculation sample for the statistic calculation (STATISTIC).
Query syntax
:CALCulate[1]:AVERage:COUNt?
Response message <count>
<count> is <NR1 numerical response data> format.
<Numerical program data>
0
1 (Excluding 0)
69